Where Does the Transmission Coefficient of Quantum Tunneling Come From?
— Following the derivation in lecture notes (6)–(9) (for second- and third-year undergraduates)
The simulator draws the transmission coefficient from the formula
— a result that comes from nothing more than a system of simultaneous linear equations from four boundary conditions.
No difficult mathematics is needed. We follow the flow of the notes and trace every step without skipping any.
The conclusion first
The wave function does not become 0 even inside the barrier. For
the solution is simply a real exponential
(a superposition of a decaying term and a growing term), and the square of the small amplitude that remains on the other side is itself the transmission coefficient.
For a thick barrier,
— and because it acts in the exponent, even a slightly thicker barrier changes it by orders of magnitude.
0. Setup
This is the setup of lecture notes (6). In the path of a particle of mass m moving along the x axis,
we place a box-shaped potential of height and thickness L.
Classically, a particle with
is always reflected. To see what happens in quantum theory, we solve the time-independent Schrödinger equation
region by region.
1. Intuition First (the 30-Second Version)
The wave function satisfies
— and the sign of the right-hand side alone determines what the solution looks like.
- (outside the barrier):
and have opposite signs → the solution oscillates ().
- (inside the barrier): same sign → the solution is exponential ().
It decays, but never reaches 0.
If the barrier has only a finite thickness, the wave gets out before it has finished decaying.
The square of the amplitude where it emerges is the transmission coefficient. The remark in the margin of the notes, “This is essentially the same as the seep-out effect!”
refers to exactly this.
2. Solving Region by Region and Matching — Lecture Notes (6)
2.1 General solutions in the three regions
Let ,
.
(1)
Why not put a left-moving wave on the right-hand side?
Because there is nothing left in the region that could reflect the wave.
The very setup of “a particle is fired in from the left” is built into this one line.
Conversely, if we kept both the right-moving and left-moving waves, we would be solving a different physical problem (an experiment with particles fired from both sides).
2.2 There are four matching conditions
Since has only finite jumps, and
must be continuous at and
.
(2)
2.3 Solving — from back to front
There are five unknowns,
and only four equations. The overall size is not fixed, so setting and
working from the back to the front spares us from solving the simultaneous equations. First, adding and subtracting the 3rd and 4th equations of Eq. (2) gives
(3)
In the same way, adding and subtracting the 1st and 2nd equations lets us write in terms of ,
and substituting Eq. (3) gives
(4)
The notes write the same quantity in the form
— the only difference is that here
has been rewritten as / ; it is the same equation.
2.4 Transmission and reflection coefficients
The transmission and reflection coefficients are ,
.
Taking the absolute value of Eq. (4) and using
and ,
the result collapses into a surprisingly neat form.
(5)
The denominators are common, and the numerators are exactly the two terms of the denominator. Hence
is obvious at a glance —
this is what the remark in the margin of the notes, “Indeed, ,” refers to.
It is the best possible evidence that the answer is correct: probability is conserved.
Why is the square of the amplitude ratio enough?
The transmission coefficient is, strictly speaking, defined as the ratio of probability currents (current of the transmitted wave ÷ current of the incident wave).
Here the potential is the same on both sides of the barrier, so the wavenumber k, that is, the speed at which the wave travels, is common to both sides, and
the ratio of the currents is simply the square of the amplitude ratio. For a step with different potential heights on the two sides,
the ratio of the wavenumbers on the transmitted and incident sides enters as a factor, so this coincidence is not a matter of course.
Finally, we substitute ,
.
Here it helps that
contains no , and we obtain
(6)
This is the formula that tab ① of the simulator draws.
3. When the Energy Is Higher Than the Barrier — Lecture Notes (7)
For we have
.
There is no need to solve the problem again. Just substitute
— that is, — directly into Eq. (6).
(7)
Together with ,
the two minus signs cancel, giving
(8)
This is the biggest difference from classical theory
Classically, if , the particle passes through 100 % of the time.
But Eq. (8) generally gives — the particle is reflected even though it has enough energy to get over the hill.
Conversely, only when ,
that is,
, does the transmission coefficient return to
(resonant transmission).
This is the condition under which the barrier thickness is an integer multiple of the half wavelength inside the barrier, so that the waves reflected from the two boundaries exactly cancel each other.
In optics, it is the same as a layer of half-wavelength thickness becoming invisible with respect to reflection (Fabry–Pérot resonance).
The anti-reflection coating that is often cited uses a different condition, a thickness of a quarter wavelength, so the thickness conditions do not coincide.
The energies at which resonance occurs are .
For the simulator’s default values ( eV,
nm, electron), they are
10.376, 11.504, and 13.384 eV. You can see these peaks in the T–E curve of tab ①.
4. The Thick-Barrier Approximation and the Gamow Factor — Lecture Notes (8)
4.1 Replacing sinh with an exponential
If , then
.
Furthermore, the fraction in Eq. (6) is much larger than 1, so the 1 inside the brackets can be dropped as well, giving
(9)
In the last equality, the notes drop even the prefactor. This is what the sentence “since the value of T is determined by the exponent”
refers to. Let us check numerically how crude this is.
| bL |
T (exact, Eq. (6)) |
With prefactor, Eq. (9) |
Error |
|
| 1 | 3.78×10−1 | 4.55×10−1 | +20 % | 1.35×10−1 |
| 2 | 6.00×10−2 | 6.15×10−2 | +2.5 % | 1.83×10−2 |
| 3 | 8.30×10−3 | 8.33×10−3 | +0.3 % | 2.48×10−3 |
| 5 | 1.53×10−4 | 1.53×10−4 | +0.006 % | 4.54×10−5 |
| 8.87 | 6.59×10−8 | 6.59×10−8 | < 10−6 | 1.96×10−8 |
Eq. (9), which keeps the prefactor, is accurate to within 0.3 % for .
On the other hand, the bare in the rightmost column stays off by a factor of about 3
— this is because the prefactor
is a constant (3.36 in this example) and does not go away however large bL becomes.
The right attitude is to accept that this is an approximation to be used only when “getting the order of magnitude right is enough.”
This is why the simulator lists both.
A real example of how orders of magnitude matter — the scanning tunneling microscope
Regard the gap between the metal tip and the sample as L, and let the barrier height minus the electron energy,
, equal the work function of the metal (about 4 eV); then
nm−1.
The tunneling current is proportional to
and therefore increases eightfold — almost an order of magnitude — when the gap shrinks by only 0.1 nm.
The scanning tunneling microscope can distinguish bumps the size of a single atom thanks to the fact that the dependence sits in the exponent.
4.2 Toward a hill-shaped potential — the Gamow factor
The second half of lecture notes (8) is the clever part. Even if the barrier is not box-shaped,
we can regard it as a stack of thin boxes and simply multiply their transmission coefficients.
Since multiplication becomes addition in the exponent,
(10)
This is the Gamow factor (it agrees with the result of the WKB approximation).
The integration runs only over the part where ,
that is, the classically forbidden region.
⚠ This “multiplication” is an intuition, not an exact scattering calculation
When thin boxes are lined up, a reflected wave arises at every boundary and their phases interfere, so in reality
— to do it exactly, one would multiply not the transmission coefficients but the transfer matrices (scattering matrices).
What is added up here is only the exponent of the factor
by which the amplitude decreases in each interval. The phases of the reflections at the boundaries and the prefactor
(the counterpart of
in Section 4.1) are discarded in this argument.
Even so, the exponent agrees with the WKB answer obtained semiclassically, and it is the exponent that determines the order of magnitude.
5. Application: α Decay — Lecture Notes (9)
This is the most famous use of the Gamow factor. Inside the nucleus the α particle is confined by the nuclear force, and
outside it feels the Coulomb repulsion. Below, is the mass of the α particle,
is the atomic number of the daughter nucleus that remains after the α particle has left,
is the radius of the nucleus (a different symbol from the R that we have used so far for the reflection coefficient).
The denominator of the Coulomb term is 2π rather than 4π because the charge 2e of the α particle has been put into the numerator.
The classical turning point is
determined by .
Using this, the expression under the square root takes the simple form
— and with the substitution
the integral can be evaluated.
(11)
⚠ Be careful how the approximations are matched here
The notes assume
and drop the second term by writing
— but they keep the third term alone, as
.
However, since
,
these two terms are of the
same order. If both are kept consistently, the coefficient doubles.
Because this sits in the exponent, the difference has a direct effect. In actual α decay, where
,
the form in the notes overestimates the integral by 32–59 %, whereas the form above gives only a 1–4 % underestimate.
This makes a good exercise in
being consistent about the order to which an expansion is kept.
6. What Does the Simulator Compute?
Tab ① evaluates Eqs. (6) and (8) above directly. Tab ② is more naive:
it simply solves the time-dependent Schrödinger equation numerically and fires a wave packet at the barrier.
| What it does | Details |
| Internal units | nm / eV / fs ( eV·fs,
eV·nm2). The numbers stay of order 1, so nothing overflows |
| Time evolution | Split-operator method (split-step Fourier method). The kinetic energy is applied in wavenumber space and the potential in real space |
| Edges | Absorbing layers are placed there, and the probability that escapes is accumulated separately for the left and right sides |
| What it is compared with | The average over the momentum distribution of the wave packet:
|
A wave packet and a single energy do not agree — and this is not an error
Eq. (6) is the answer for a single energy. A wave packet, however, always has a spread in energy
(the price of localizing the position). For this reason the transmission probability actually measured should be compared not with
, but with
the average weighted by the momentum distribution.
Because T varies exponentially with E,
the high-energy side of the spread dominates overwhelmingly, and the average comes out larger than the value at the center
(this applies to the tunneling regime .
For , T oscillates because of resonances, so
at the top of a resonance peak the average is, conversely, smaller).
The wider the spatial width of the wave packet — that is, the narrower its spread in energy — the closer the two become.
7. Checking Numerically
Since the derivation was done entirely by hand, it has been checked independently by numerical computation.
The table compares the complex amplitudes obtained by solving the four equations of Eq. (2) directly, starting from ,
with the closed forms in the notes.
| What was checked | Agreement |
| from solving the boundary conditions directly vs Eq. (4) (three combinations of k, b, L) |
relative difference < 1×10−15 |
| Likewise, vs Eq. (5) |
relative difference < 1×10−15 |
| exact (< 10−16) |
| Rewriting Eq. (5) into Eq. (6) | relative difference < 5×10−16 |
| Analytic continuation in Eq. (7) → Eq. (8) | exact agreement |
| Resonance gives |
12 digits |
| Closed form of Eq. (11) vs numerical integration | relative difference < 2×10−11 |
On the differences from the numbers in the notes
The notes give ,
,
and . Here,
and are from
the tunneling example with eV,
whereas , back-calculated from the numbers, corresponds to
eV — that is, it appears to come from
another example with , to which Eq. (8) applies
(both with eV,
nm).
For the tunneling example, , so
there is no point in listing it here. With the CODATA values we get
,
,
and . The difference comes only from the rounding
— which in terms of is a difference of 0.4 %.
That 0.4 % is amplified through
to 5 %, and in it is amplified to 10 % through the slope of .
The lesson: carry one extra significant figure for anything that sits in an exponent or inside a trigonometric function.
8. Summary
- Solve the Schrödinger equation in each region and join the solutions with the four continuity conditions on and
. That is all — Eqs. (1) and (2).
- Setting and working from the back to the front yields
without solving the simultaneous equations — Eqs. (3) and (4).
- Taking absolute values gives a common denominator,
so that is obvious at a glance — Eqs. (5) and (6).
- For we simply substitute
.
turns into , and resonant transmission appears — Eqs. (7) and (8).
- For a thick barrier, .
Cutting the barrier into thin slices and multiplying yields the Gamow factor, which can be used for a barrier of any shape that varies slowly
(strictly, one should multiply transfer matrices, but the exponent is determined this way) — Eqs. (9) and (10).
- Applying it to the Coulomb barrier gives the lifetime for α decay — Eq. (11).
A single formula works all the way from electrons in the laboratory to atomic nuclei.